How To Clean Soap Scum in the Shower


How to clean soap scum? Soap scum is highly unavoidable. When you are taking a shower there’s is no way you can prevent soap from splashing all over the place. Most times you cannot see it but it is there. Unless you wash your shower each time you take a bath then you can be sure there’s no soap scum but who has time for that every day.

The worse that can happen is that when soap scum is left for some time it will become very difficult to remove. A few days ago I asked my son to clean his shower. I went in to take a look I slid my fingers on the tiles. It was just disgusting yet he claimed he cleaned it. With what he cleaned it? I really don’t know.

Removing soap scum takes more than just a wipe with a piece of cloth. You are going to need a few good soap scum prevention techniques. In this article, I will show you just how to remove stubborn soap scum with my secret stubborn soap scum removal hack and shower cleaning tips that’ll make your shower sparkle like never before. How to prevent it is not far behind.


How to Clean Soap Scum:

Dealing with that pesky soap scum is no biggie! With the following DIY soap scum remover your shower is bound to look amazing!


First, begin with the grout. To tackle that stubborn soap scum in between tiles, get yourself a scrub brush. Next, grab 1 cup of distilled vinegar and mix it up with an equal amount of water to make your homemade potion. Use that magic mist to spritz the tiles and let it sit for 5-10 minutes.

Next, get your trusty Dawn dish soap and sponge. Pour a dab of the dish soap on the wet sponge and give it a good scrubbing.

Give it a little elbow grease, and say goodbye to the scum and hello to clean grout goodness.

They’ll be shining like new. 

Now, to make your shower smell all kinds of amazing, add a few drops of your favorite essential oil to the dish soap. It’ll take away that vinegar smell, leaving your bathroom smelling fresh and fantastic. Enjoy your sparkling, sweet-smelling shower!”

The Best Way to Clean Soap Scum on Shower Tiles



Vinegar is perfect for soap scum removal. As you know there are multiple commercial products for cleaning soap scum. But, none is as effective as the good old vinegar. To clean soap scum on shower tiles baking soda and vinegar is most recommended and are natural soap scum cleaners. Here are the instructions…

  1. Pour 1 cup of white distilled vinegar into a spray bottle
  2. Next, pour in 2 cups of warm water and mist the shower tiles
  3. Allow sitting for 5-10 minutes
  4. Scrub with a sponge and dish soap
  5. For stained areas, pour the baking soda on the sponge and wipe on the stain
  6. Let it sit again for another 5 minutes
  7. Scrub the spot and rinse
  8. Dry the tile well to prevent water spots



You heard it right! WD-40 isn’t just for fixing squeaky hinges; it’s a game-changer for your shower too! Say goodbye to watermark soap scum nightmares and welcome the magic of WD-40 into your bathroom routine.

No more scrubbing till your arms ache! With a simple application of WD-40, those stubborn soap scum stains on your shower doors, walls, and even the faucets will be history. Embrace the ease of this oil-based spray that effortlessly cleans away spots on glass surfaces. And that’s not all! WD-40 works its charm as a preventive measure too, ensuring soap doesn’t get the chance to dry up on your shower fixtures.


Here’s how it works: Spray a little WD-40 on the affected areas, Let it sit for a few minutes, then wash with soap. The result? Sparkling shower surfaces that gleam like new! You’ll be amazed at how a product you probably already have at home can be the ultimate soap scum vanquisher.

Preventing Watermarks:

Not only does WD-40 bid adieu to soap scum, but it also leaves a protective film that makes future cleaning a breeze. Imagine spending less time scrubbing and more time enjoying a refreshing shower – that’s the beauty of WD-40 in action!

Oh, and don’t worry about any lingering oily residue; WD-40’s got you covered there too! A quick rinse is all it takes to leave your shower surfaces squeaky clean and ready to shine.





  1. Gather Your Supplies: Before diving into the battle against old soap scum, gather your cleaning arsenal. You’ll need white vinegar, baking soda, a scrub brush or sponge, a spray bottle, and warm water.
  2. Ventilate the Area: Open windows or turn on a fan to ensure proper ventilation while you clean.
  3. Prepare the Vinegar Solution: In a spray bottle, combine equal parts of white distilled vinegar and warm water. The vinegar’s acidity will help dissolve the tough soap scum.
  4. Spray and Soak: Generously spray the old soap scum areas with vinegar solution. Make sure to cover all the affected surfaces thoroughly.
  5. Let it Sit: Allow the vinegar mixture to sit on the soap scum for about 15 to 20 minutes. This will give it time to break down the stubborn buildup.
  6. Scrub it Off: Armed with a scrub brush or sponge, start scrubbing the soap scum. Apply firm pressure but be gentle to avoid damaging the surface.
  7. Focus on Troublesome Spots: For more stubborn areas, sprinkle some baking soda on the soap scum before scrubbing. The gentle abrasive action of baking soda can aid in lifting the buildup.
  8. Rinse and Repeat: Once you’ve scrubbed away the soap scum, rinse the area thoroughly with warm water. If there are still some remnants left, repeat the process until it’s completely gone.
  9. Dry and Inspect: After rinsing, dry the cleaned surfaces with a clean cloth. Take a moment to inspect for any leftover soap scum; if needed, touch up those areas.
  10. Prevent Future Buildup: To prevent old soap scum from returning, consider using a squeegee after each shower to remove excess water from surfaces. Regular cleaning with a mild soap and water solution can also help keep soap scum at bay.
  11. Natural Alternatives: If you prefer natural alternatives, you can try replacing the vinegar solution with lemon juice or a mixture of vinegar and essential oils like tea tree oil.

Remember, cleaning old soap scum might require some elbow grease, but with these effective methods and a bit of persistence, you can restore your surfaces to their former glory. Happy cleaning!

Extra Tip: Using a body wash instead of bar soap will help reduce the fast build-up of soap scum in your shower.





To soap scum on soap scum on shower glass doors use any of these two hacks below.

Lemon Method: Cut a lemon in 2 then sprinkle the baking soda onto the lemon. Use this to rub onto the shower door. Making sure to get the corners moving your hand in a circular motion.

Dawn dish soap Method: Simply ladder the door with Dawn dish soap and let it rest. Do not wipe right away as you want to enable the solution to penetrate for 20 minutes.

Next, scrub the surface with an abrasive cloth or my most loved, Mr. Clean Magic Eraser. Rinse with warm water and dry.


The End

In conclusion, banishing soap scum and achieving a spotless shower requires more than simple cloth wipes. But fear not! Armed with the right soap scum removal techniques and my secret stubborn soap scum removal hack, your shower will be transformed into a haven of cleanliness and brilliance.

Embrace the power of these shower cleaning tips, and you’ll bid farewell to stubborn soap scum forever! And remember, prevention is key; stay tuned for our expert advice on keeping soap scum at bay. Get ready to revel in a shower that sparkles like never before, thanks to these invaluable soap scum-busting strategies. Say hello to a gleaming, scum-free sanctuary, and let your shower shine bright!

Happy cleaning!

Article You May Like: