The headlights on your car tell a lot about your car, but keeping up the appearance of your headlights is another story. A foggy headlight can be a serious hazard to you and others especially at night. It’s time to get those hazy headlights clean. Here you’ll learn the proper way to clean headlights with WD-40 and also other amazing ways to clean headlights using DIY methods that actually work. You don’t need to be a pro to clean headlights.
What Does WD-40 Stand For
Water Displacement 40th Formula, the secret ingredients of this formula are still unknown. However, WD-40 is one of the most used formulas when it comes to cleaning rust as it is an anti-corrosion agent that penetrates and is used for soil removal and water displacement.WD-40 can also be used as a cleaner for various household items.
Is WD-40 Flammable…
Yes and no, Wd-40 is combustible therefore making it not flammable’ However, WD-40 when sprayed near an open flame or even a simple spark becomes an aerosol which is likely to cause a flame. This action can cause a drawback to the can resulting in an explosion. Oops!. Simply put, avoid spraying WD-40 near sparks or flames.
Is WD-40 A Lubricant?
WD-40 is a multi-surface silicone lubricant that operates on multiple surfaces to waterproof, lubricates, and protect. Its core job is to protect non-metallic and metallic surfaces and headlights fall right into that category.
Can You Clean Headlights With WD-40
The answer is YES.WD-40 can be used in the process of cleaning your headlights. While it’s not recommended as a stand-alone cleaner The proper way to clean headlights is to clean the surface before applying. The method you used to clean headlights varies as there are many ways to clean headlights.
How To Clean Headlights With WD-40
Foggy headlights are a result of debris in the environment that got stuck to the glass. This can make driving difficult as you depend on your headlights to see the road, especially at night. WD-40 is known and proven to clean these types of lights. It will remove dust, dead insects, and dirt. The method for this doesn’t need an expert all you need is a bottle of this formula and a cloth.
The Method…
- Wipe away the dust then give it a second wipe with a damp cloth
2. Mist the headlights with wd-40 and allow sitting for 10-15 minutes
3. Use a clean sponge to gently scrub the headlights
When you are through, grab a sheet of old newspaper and buff the lights to remove any streaks or smudges. To take it a little further, WD-40 can also be used to clean the rims of your car.
The Best Way To Clean Headlights
Cleaning your headlight comes with a few simple tricks that go right back to using WD-40. If you really need to thoroughly deep clean your headlights then follow these steps.
Step.1 Clean the area with liquid soap, laundry detergent, or dish soap. This is to remove the excess dirt.
Step.2 Cover the outer area of the light with duct tape. This is to prevent the cleaners used to get into other parts of the car
Step.3 Squeeze a dab of toothpaste on a damp microfiber cloth and clean the lights in a circular motion
Step.4 Wipe with a clean damp microfiber cloth
Step.5 Usually in this step a car wax would be used however, use the WD-40 instead to mist the light and wipe with a sheet of paper towel or a sheet of old newspaper. WD-40 is formulated with lubricating oils that will prevent debris from sticking to the surface of the light. To sum it up WD-40 can be used as an alternative for car wax which is normally used as an extra protective layer when cleaning certain areas of your car.
How To Clean Headlights With Vinegar And Baking Soda
Your foggy headlights can be clean with vinegar and baking soda. Vinegar is commonly used as a household cleaner to break down stubborn particles like grease and dirt and is proven to be eco-friendly. When vinegar is combined with baking soda it becomes a powerful formula that can be used to clean headlights. Here is how to get the job done.
You’ll Need…
- white vinegar
- baking soda
- microfiber cloth
- container
- liquid soap
- Rubbing alcohol
Method…
Step.1 Use the microfiber cloth and the dish soap to wash the headlights and swiftly dry removing the excess water
Ste.2 For this step combine part vinegar and part baking soda in a container and mix in to make a paste
Step.3 Use a microfiber cloth to apply the paste to the headlight
Step.4 Rinse the headlight thoroughly with clean water until all the paste is gone. Allow air drying
Step.5 To make add to the transparency of the surface mist with rubbing alcohol and wipe with a dry cloth until there is no moisture left.
Step.6 Use car wax to buff the headlights to keep them looking clear for a longer period of time.
Cleaning Headlights With Toothpaste
A tube of toothpaste goes along when it comes to maintaining the appearance of your car’s headlight. Why use toothpaste? Toothpaste contains acidic properties that break down hardheaded particles. Cleaning headlight with toothpaste can be the perfect at-home DIY cleaner for your lights. Here is how to clean headlights with toothpaste.
Step.1 Squeeze a dab of toothpaste on a damp microfiber cloth. You don’t need to wash first when using this method
Step.2 Wipe the headlight in a circular motion until you’re satisfied that all the sticky residues are loosen
Step.3 Rinse with warm water and allow to dry.
Check Out This Related Article…Mom’s WD-40 Household Tricks She Never Told You
Conclusion…
We have come to the end of cleaning headlights with WD-40. We took a walk through getting to know what is WD-40, what type of lubricant is WD-40. How to clean headlights with WD-40 and the best way to clean headlights which gives you an extra tip on exactly how to get the best results when cleaning headlights with WD-40.
We hope the tips were helpful. Thanks for stopping by
You May Also Like This Amazing Article...15 Nostalgic Murphy’s Oil Soap Cleaning Hacks
